Study of ionospheric D region changes during solar flares using MF radar measurements

During solar flares, the X-ray radiation suddenly increases, resulting in an increase in the electron density of the atmospheric D region and a strong absorption of short-wave radio waves. Based on Langfang medium frequency (MF) radar, this paper analyzed the variation characteristics of D region in the lower ionosphere from 62 km to 82 km. The analysis focused on multiple C-level and M-level solar flare events before and after the large-scale flare event at 11:53 (UT) on September 6, 2017. The results show that it is difficult to detect the electron density over 70 km in Langfang during solar flares, but the electron density value can be obtained as low as 62 km, and the stronger the flare intensity, the lower the detectable electron density height. Besides, the equal electron density height, the received power of X and O waves will also be significantly reduced during the flares, and the reduction of equal electron density height has a weak linear relationship with flare intensity.     

三维数模随动下的机翼结构重量优化

目前,基于快速建模下的重量重心估算系统得到了快速发展。为了进一步提高结构重量估算精度,研究了如何在重量重心快速分析(WCGA)系统环境中构建优化模块。以机翼结构重量优化为例,提出优化流程,对优化模块功能进行分解,给出模型简化要求。以A320飞机机翼为例,对梁和长桁进行优化,结果显示,经过优化,有效减轻了结构重量,且相比于传统的减重优化设计方法,极大提高了计算效率。     

PVC糊树脂对交联PVC泡沫塑料的影响

通过水煮发泡制备交联聚氯乙烯泡沫塑料,讨论了聚氯乙烯(PVC)糊树脂对泡沫制备过程中经制糊、模压和发泡工艺得到的产物的影响,研究了PVC糊树脂对制备的交联PVC泡沫压缩性能的影响.结果表明:制备交联聚氯乙烯泡沫塑料适宜的糊黏度是4～9 Pa·s;PVC糊树脂的K值较大或水萃取液pH值呈碱性可有效防止模压过程中PVC的降解;PVC糊树脂的水萃取液pH值呈碱性可催化发泡反应,有利于得到低密度泡沫且缩短发泡时间;随着其K值增加,制备的泡沫压缩强度增大,但是K值过大时,制备的泡沫泡孔较大,压缩强度反而降低,适宜的K值为70～80.     

黏胶纤维在低温热处理过程中的热收缩性能

利用动态热机械分析仪结合热失重曲线和红外光谱图分析了黏胶纤维在低温热处理过程中的热收缩行为,研究了催化剂、张力等因素对热收缩性能的影响,并结合热解机理阐述了这一过程中黏胶纤维的结构变化,对于黏胶基碳纤维制备工艺参数的选取提供了一定信息.     

运输类飞机巡航阻力CFD计算分析

针对运输类飞机设计过程中的巡航阻力准确预测问题,采用基于多块结构网格求解三维雷诺平均Navier-Stokes方程的并行流动求解器“CCFD-MB”,对AIAA阻力预测小组提供的典型运输类飞机DLR—F6翼身构型进行了CFD计算分析,比较了小同规模网格及不同湍流模型对计算结果的影响;并通过与DLR-F4翼身构型计算结果...     

高速飞行器轻质防热材料高温环境下的隔热性能研究

导弹等高速飞行器广泛采用轻质材料进行热防护,但实际使用的轻质防热材料由于在密度、质量、工艺、生产批次等多方面的原因,厂家提供的非连续表征的离散式材料导热系数,与非线性连续变化的实际热参数之间存在一定差别.建立轻质防热材料高温导热系数测量装置,通过试验得到轻质高温陶瓷隔热材料导热系数与温度之间的非线性关系,为提高数值计算...     

Microwave Photonics for Modern Radar Systems

The emerging new concepts and technologies based on microwave photonics have led to an ever-increasing interest in developing innovative radar systems with a net gain in functionality, bandwidth/resolution, size, mass, complexity and cost when compared with the traditional implementations. This paper describes the techniques de- veloped in the last few years in microwave photonics that might revolutionize the way to design multifunction radar systems, with an emphasis on the recent advances in optoelectronic oscillators （OEOs）, arbitrary waveform gener- ation, photonic mixing, phase coding, filtering, beamforming, analog-to-digital conversion, and stable radio-fre- quency signal transfer. Challenges in implementation of these components and subsystems for meeting the technique requirements of the multifunction radar applications are discussed.     

不同温度下TC21钛合金等离子表面渗Cr层的摩擦磨损性能

为提高TC21合金的摩擦磨损性能，采用双辉等离子冶金技术在TC21合金表面制备渗Cr改性层，利用扫描电镜(Scanning electron microscope,SEM),能谱仪(Energy dispersive spectromenter,EDS),显微硬度仪和划痕仪等研究了渗Cr层的组织形貌特征、硬度及结合强度，并 在20,300,500 ℃条件下使用摩擦磨损试验机对基体及渗Cr层的摩擦磨损性能进行对比、探究，并分析磨损机理。结果表明：渗Cr层厚度为30μm，均匀致密，与基体结合力至少能承受64 N的垂直载荷；改性层表面硬度超过1 000 HV0.1，约为基体的3倍；TC21合金渗Cr后，不同温度下的减摩性能和耐磨性能均得到提高。在室温下TC21基体磨损机理主要是磨粒磨损、粘着磨损和氧化磨损，而渗Cr层的磨损机理主要是磨粒磨损；500 ℃时基体粘着磨损和氧化磨损程度变得更加严重，渗Cr层磨损机理是剥层磨损和氧化磨损。 